bootmod3
bootmod3 Summary
bootmod3 is a mobile iOS app in Tools by PRO TUNING FREAKS INC.. Released in Dec 2016 (9 years ago). It has 839 ratings with a 4.75★ (excellent) average. Based on AppGoblin estimates, it reaches roughly 5.1K monthly active users . Store metadata: updated Mar 9, 2026.
Recent activity: 28 new ratings this week View trends →
Store info: Last updated on App Store on Mar 9, 2026 .
4.75★
Ratings: 839
Screenshots
App Description
bootmod3 is the First and Most Widely Adopted flash tuning platform for the BMW F and G series vehicles and the new A90/A91 Toyota Supra.
Map Switching using steering wheel, Flex Fuel Tuning, Anti-Lag, Ethanol Content Checking on the RPM gauge in the dash, and more..
*** All New Map Editor!
Connect an ENET cable to your iOS device or use the bootmod3 WiFi Adapter for any programming, dashboard, datalogging and diagnostics.
bootmod3 allows end users to unleash the full performance potential of their BMW while doing so as the factory intended by programming the factory engine control unit (ECU/DME) and transmission (TCU, where applicable) over the OBD diagnostic port.
Program your car and gain 70-120hp in just 3minutes with an off the shelf tune. Switch among pump gas and race gas maps in just seconds.
CustomROM Features available for most vehicles supported:
- Map switching using steering wheel cruise control buttons, switching entire calibration tables right inside the factory DME
- Flex fuel functionality integrating a Flex Fuel Sensor
- Antilag functionality to build boost off the line or while rolling
- Live adjust screens for adjusting exhaust burble on the fly without re-flashing using a simple slider control in the app
- In-Dash Ethanol content check on the RPM gauge using cruise buttons on the steering wheel (e.g. 1500rpm = 15% ethanol, 6000rpm = 60% ethanol)
/// OTS maps
Load pre-made performance tunes for your vehicle
/// CUSTOM TUNING
Customize the performance tuning on your DME / ECU using our custom tuning interface. Tailor performance, sound, fuel economy to your specific needs. Flash the transmission with GTS software on supported models.
/// Live Monitoring
Monitor your engine behaviour using a configurable gauges layout to keep on eye on any of the hundreds of engine monitors internal to the ECU including BMW specific logging channels and RAM variables. Monitor torque limits, boost, ignition timing, variable valve timing, fuel targets, fuel trims, across all cylinders, etc.
/// Cloud Enabled
Cloud services allow for datalogs and maps to be stored in one central location and access from any location
/// FEATURES
For feature descriptions please refer to our website for each particular vehicle you're interested in tuning using the bootmod3 platform.
Supported vehicles:
Bosch MEVD17.2 DME Vehicles:
F8x M3, M4
F2x F3x 135i, 235i, 335