Thermal Cam

"Thermal Cam" is an application that displays small, lightweight, low power consumption infrared camera (FLIR LEPTON 1) images on iPhone or iPad by tethering.
Please note that the same application "Thermal Cam 3” is exclusively for FLIR LEPTON 3.
"Thermal Cam" requires separate parts. Please check the following URL for used parts and source of infrared camera side.
 http://takesan.hatenablog.com/entry/2017/09/23/172259

"Thermal Cam"
-> Ultra compact infrared cameras prepared separately You can check images from distant places (normally maximum 30 m - 50 m) by using the tethering function of iPhone.
-> Since infrared cameras are compact and lightweight and have low power consumption, they can be installed in ultra-small TOY drone, including fixed position observation.
- WIFI port number can be changed from iPhone.
- Infrared movie can set six kinds of color.
- 3D point cloud images can be displayed so that temperature bands can be recognized by visually impaired people as well as ordinary 2D screens.
- Contrast can be adjusted even when a street including "sky" with a large temperature difference in the image and "flames" etc.,
- Tap the necessary part of iPhone display to measure the temperature of that part.
- 2D, 3D images can be stored in the camera roll. Although you can transfer the copied movie by e-mail, it is recommended that you upload it to a video site or iCloud because the file size is large.
- Maximum minimum temperature scale, arbitrary temperature, dynamic range correction, date and time displayed in the image can be saved as they are.
"Thermal Cam" can be used on iPhone installed with iOS 11.2 or higher.
following models has been tested
- iPhone 6
- iPhone 6 Plus
- iPhone SE
- iPhone 7
- iPhone 7 Plus
- iPhone X
- iPad mini4
- iPad Air2
iPhone 8,8Plus is confirmed to work only with Simulator.
About the usage of iPhone and iPad batteries of "W & T Thermal Cam".
- Because the tethering function is used during use, the battery may be consumed to a large extent.
About the use of "W & T Thermal Cam".
- If you turn on Bluetooth on the iPhone or iPad during use, the frames rate picture(fps) becomes remarkably low. Be sure to turn off Bluetooth.
- Also too many Wifi points surrounded or 2.4Ghz radio, the fps becomes remarkable low.
*************************************************************************************
「Thermal Cam」は小型