BendCalc: Conduit Bending
BendCalc: Conduit Bending Summary
BendCalc: Conduit Bending is a free, with in-app purchases iOS app in Tools by Martin McGee. Released in Mar 2026 (5 months ago). It has 8.00 ratings with a 4.38★ (good) average. Based on AppGoblin estimates, it reaches roughly 91 monthly active users and generates around $<10K monthly revenue (100% IAP / 0% ads). Store last updated Jul 28, 2026
BendCalc: Conduit Bending SDKs Summary
App not yet scanned for SDKs.
4.38★
Ratings: 8.00
Screenshots
App Description
Stub-Up + Offset : free and unlimited
BendCalc Pro: five advanced bends + NEC Chapter 9 conduit fill
One-time purchase · No subscription
BendCalc turns bend math into field-ready marks. Pick your bender once —
results use its published take-up where it applies, shown in tape fractions
to the nearest 1/16".
FREE AND UNLIMITED
• Stub-Up — mark from the conduit end, arrow alignment, your bender's take-up
• Offset — distance between marks and shrink from the published field tables
BENDCALC PRO - ONE PURCHASE UNLOCKS EVERYTHING
• Rolling Offset - true offset, marks, shrink, and rotation from horizontal
• Back-to-Back - both 90° marks from the conduit end
• 3-Point Saddle - center and outer marks, plus shrink
• 4-Point Saddle - all four marks from the saddle center, plus shrink
• Kick — kick mark spacing and shrink
• NEC Chapter 9 Conduit Fill - fill-limit status for THHN/THWN conductors
(NEC 2023, Chapter 9 Tables 1, 4, and 5)
BUILT FOR THE FIELD
• Every constant is sourced — check Math & Sources in the app
• Works offline after unlock. No account. No subscription.
• Restore Purchases on any device with your Apple Account