Wire Size Calc

NEC wire size calculator for electricians, apprentices, and electrical engineers.

Determine the correct wire gauge (AWG/kcmil) for any circuit using official NEC 2023 ampacity tables and derating factors. Supports continuous and non-continuous loads, copper and aluminum conductors, 6 insulation types, and both conduit and free air installations. No internet required - works 100% offline on the job site.

FEATURES:
- Continuous and non-continuous load sizing (125% factor)
- 5 voltage presets: 120V, 208V, 240V, 277V, 480V
- Single-phase and three-phase support
- Copper and aluminum conductors: 14 AWG through 2000 kcmil
- 6 insulation types: THHN, THW, TW, XHHW-2, NM-B, USE-2
- Conduit and free air installation methods
- Temperature correction factor (NEC 310.15(B)(1))
- Conduit fill adjustment factor (NEC 310.15(C)(1))
- Termination rating check (60°C / 75°C per NEC 110.14(C))
- Overcurrent protection sizing (NEC 240.4(D))
- Optional voltage drop check when distance is provided
- PASS/FAIL indicator for quick compliance check

NEC REFERENCES:
- Table 310.16 - Ampacity in conduit/raceway
- Table 310.17 - Ampacity in free air
- Table 310.15(B)(1) - Temperature correction factors
- Table 310.15(C)(1) - Conduit fill adjustment factors
- NEC 110.14(C) - Termination temperature limits
- NEC 240.4(D) - Small conductor overcurrent protection

PRO FEATURES (one-time purchase):
- No ads
- Save calculation history
- Export calculations as PDF reports
- Dark theme support

BUILT FOR THE JOB SITE:
This app is designed by electricians, for electricians. Enter your circuit parameters, get the recommended wire size instantly - no complicated menus or unnecessary features. One-hand operation, instant results.

HOW IT WORKS:
1. Enter load current in amps
2. Select load type (continuous or non-continuous)
3. Choose voltage, phase, conductor material, insulation type
4. Set installation method and ambient temperature
5. Get recommended wire size with full derating breakdown

The calculator automatically applies:
- 125% continuous load factor
- Temperature correction for ambient conditions
- Conduit fill adjustment for conductor count
- Termination temperature limit verification
- Standard breaker size selection

PERFECT FOR:
- Licensed electricians
- Electrical apprentices
- Electrical engineers and designers
- Electrical contractors
- NEC code exam preparation
- Journeyman an