Keysight Oscilloscope Mobile

Developer: Keysight Technologies, Inc.

Category: Productivity

Add App to Comparison

300 installs

6.00 ratings

10 monthly active users

Revenue not available

Keysight Oscilloscope Mobile Summary

Keysight Oscilloscope Mobile is a mobile iOS app in Productivity by Keysight Technologies, Inc.. Released in Dec 2013 (12 years ago). It has 6.00 ratings with a 3.33★ (mixed) average. Based on AppGoblin estimates, it reaches roughly 10 monthly active users . Store metadata: updated Jun 21, 2018.

Store info: Last updated on App Store on Jun 21, 2018 .

SDKs, Trackers & Permissions

App not yet scanned for SDKs.

App Details

Store ID: 749341889

First Released: 2013-12-04

Store Last Updated: 2018-06-21

In-App Purchases: No

Ads: No

Website: keysight.com

App Store

Crawl Status: Success

AppGoblin First Crawled: 2022-12-24

AppGoblin Last Crawled: 2026-03-19

Ads & App-Ads.txt

App does not have ads.

AppGoblin SDK Scans

App not yet analyzed for SDKs.

The download and scan process is automated but can require manual troubleshooting. Feel free to reach out if your request does not complete in 24hrs or if you have any questions.

3.33★

Ratings: 6.00

5★

4★

3★

2★

1★

Screenshots

App Description

(Note: you may also be interested free Keysight mobile app named BenchVue Mobile that supports oscilloscopes, spectrum analyzers, function generators, DMMs, and power supplies.)

Keysight Oscilloscope Mobile is the result of an investigation by Keysight Labs. It enables you to view live waveforms, make measurements, capture instrument screenshots and control your Keysight/Agilent oscilloscope from your iPad or iPhone.

Key Features
- Supports up to 4 analog channels
- Simulation mode available - experiment with the app before connecting it to your oscilloscope
- Save screen captures from your instrument onto your mobile device
- View and control oscilloscopes that are connected by LAN, USB, GPIB or RS232
- Collaboration - Have a colleague connect to the same scope on their tablet or phone and see what you see.

Control the following functions on your Keysight/Agilent oscilloscope (see below for supported models/firmware)
- Start/stop/single acquisition
- Autoscale
- Change time/div
- Change volts/div
- Turn channels on/off
- Select trigger type/level/source
- Measure: frequency, rise/fall time, min/max, peak-peak

CONNECTING TO AN OSCILLOSCOPE

If your oscilloscope is on the network, you can connect to it directly from your mobile device as follows:
1. On your mobile device, start Oscilloscope Mobile and tap Connect to Scope
2. For the Choose Connection setting, tap Direct
3. Enter the IP Address or hostname of your oscilloscope and tap Connect

If your oscilloscope is connected to your PC via LAN, GPIB, USB or RS232, you can connect to it through Oscilloscope Mobile Agent running on your PC as follows:
1. On your Windows PC ( WinXP, Win7, Win8, Win10), install Keysight Oscilloscope Mobile Agent
Available free from http://www.keysight.com/find/scopemobile
2. Start the Keysight Oscilloscope Mobile Agent on your PC and connect to your oscilloscope.
3. Start this app and tap Connect to Scope.
4. Enter the IP Address or hostname of your PC and tap Connect.

SUPPORTED OSCILLOSCOPE MODELS

The following Keysight/Agilent 0scilloscope series and firmware revision levels are supported:
InfiniiVision 2000 X-Series, minimum firmware revision 01.10
InfiniiVision 3000A X-Series, minimum firmware revision 01.10
InfiniiVision 3000T X-Series, minimum firmware revision 04.00 (1)
InfiniiVision 4000 X-Series, minimum firmware revision 03.00
InfiniiVision 5000 Series, minimu