Heat Engineer

Heat Engineer has been designed to help heating engineers and surveyors gather information about a property for the installation of a heating system. The options available for heat loss reports are renewable technologies such as Air Source Heat Pumps, Ground Source Heat Pumps, Biomass or conventional fossil fuels.

Please visit our website to create an account and watch our training videos. www.heat-engineer.com

Heat Engineer Software Ltd is an Industrial Associate Supporter of the Chartered Institute of Plumbing & Heating Engineering.

----Heat Engineer has three functions ----

1 - Heat Loss survey, designed to meet BS EN 12831, CIBSE Domestic Heating Design Guide and MCS standards. When the survey is completed you can send it to your account at www.heat-engineer.com

2 - MCS 020 Planning Standards, sound assessment for Air Source Heat Pumps.

3 - A quick heat loss estimator tool.

-----Important useful feature----
Every entry made is automatically saved in the app’s history so you can revisit any time to amend either your sound assessment or heat loss survey. For MCS 020 Sound assessments this is particularly useful if you don’t know the sound power decibel rating whilst on site and haven’t yet decided which manufacturer to use. You can use the app on site to record data you have and revisit your history to update the project once you’re back in the office.

1----Heat Loss Survey----

Complete a site survey for a room by room heat loss calculation. The parameters within this app are detailed so calculations can be carried out following the domestic heating design guide and requirements to meet MCS standards. This tool is for collecting details of a property so you can then send it to an online Heat Engineer account. If you are a Heat Engineer account holder at www.heat-engineer.com then you can review your survey and produce a detailed heat loss report.

Take photos for each room and installation locations.

• Pre-populated drop down lists for room names and options to add custom names.

• Pre-populated drop down lists and options to add custom description and U values for all building materials, walls, floors, windows, doors, ceilings and roof.

• For ‘complex rooms’, rooms with lofted/vaulted ceilings and roof an option to select which image profile, so measurement and wall types can quickly be entered.

• Current Emitter selection