AISSENS Connect

AISSENS Connect is a multi-functional Bluetooth application specially designed for ASUS sensors (AISSENS) to improve the efficiency of sensor use.

AISSENS Connect is a Bluetooth application designed specifically for AISSENS vibration sensors to provide sensor pairing settings. Through this application, users can easily implement the sensor's WiFi connection settings, MQTT connection settings, scheduled recording settings, and NTP Server settings. It is suitable for a variety of industrial application scenarios to ensure the operation of the equipment. stability and efficiency.

Introduction to core functions of the application:
1. Bluetooth pairing and sensor detection: AISSENS Connect provides advanced Bluetooth Low Energy (BLE) technology, which can automatically search for nearby ASUS sensor devices, and when multiple sensors are detected, the , sensor ID, status, model and other information, allowing users to accurately select the required device for pairing. When the sensor is successfully connected, the application will automatically be directed to the home page and activate the relevant data monitoring function. - If the sensor is not detected, the application will display the prompt message "Sensor not detected" and remind the user to confirm the power status of the sensor and search again.

2. Real-time monitoring of sensor status: On the home page, AISSENS Connect will instantly display the operating status and key data of the sensor, covering sensor pictures, ID, battery power, bandwidth (KHz), and sampling rate (KHz) , acceleration range (±g), firmware version, brand, model, NCC certification label and other parameters, allowing users to quickly understand the operation of the equipment. The home page also has a "Switch Sensor" function key to facilitate users to quickly switch between multiple paired sensors.

3. Wi-Fi connection and network configuration management: AISSENS Connect supports detailed Wi-Fi network settings, including viewing the SSID, signal strength, IP address and sensor MAC address of the current Wi-Fi connection . In addition, the app allows users to choose to automatically obtain an IP address (DHCP) or manually enter static IP settings, and provides the ability to change Wi-Fi settings. Users can enter the SSID and password by themselves, and manually set the IP address, gateway, network prefix length and DNS server to adapt to different network environment needs.

4. MQTT connection management and remote data transmission: The application supports the MQTT protocol, which allows the sensor to transmit data through the remote server. Users can set the address and password of the MQTT server through AISSENS Connect, and quickly modify the connection