ジムカーナ走行解析アプリ ArchivePro

This app is for gymkhana and records GPS location information, driving data such as speed, acceleration, roll, and pitch, as well as weather and vehicle setting information during driving.

This app for gymkhanas records and analyzes driving data such as GPS location, speed, acceleration, roll, and pitch, as well as weather information (temperature, humidity, road temperature, weather, road conditions, air pressure), and vehicle settings. Instructions for use are available here. This is a Japanese-localized version of the GPS driving recording app (Archive) with new features and an ad-free experience. Recorded data can be viewed in the viewer along with driving trajectory and information such as speed, acceleration, pitch, and roll. Temperature, humidity, and weather can be automatically set by obtaining weather information via the internet (requires an OpenWeatherMAP API key). Temperature and humidity can be automatically set by connecting to a SwitchBot thermometer/hygrometer (requires the SwitchBot thermometer/hygrometer's MAC address). You can also directly edit temperature, humidity, road temperature, weather, road conditions, and air pressure by tapping. Connecting a GPS logger other than the built-in GPS sensor allows you to record more accurate driving tracks than the built-in GPS sensor. To select a course to drive, tap the course (course name) on the course selection screen (course must be registered in advance). To register a course, you can use the course name and the built-in camera to capture and record the course map (recorded images can be viewed in the viewer). To register setting information, tap on the part selection screen and select the part (part name) for which you want to register setting information. You can register or change setting information (adjustment values, notes) by tapping the part (part name) selected as setting information (parts for which you want to register setting information must be registered in advance). To register, modify, or delete courses and parts, select "Parts & Courses" from the menu. On the Parts & Courses screen, tap and to register new parts or courses. When registering a new part, you can enter the part name, notes, and number of uses on the input screen. When registering a new course, you can register the course name on the input screen. To modify a part, tap the part (part name) you want to modify. To take a photo of a course, tap the course you want to take a photo of (course name) and select "Take a photo with camera" from the menu. To check the course you have taken a photo of (viewer), select "Show image" from the menu. To change the course name, select "Change course name" from the menu. Driving data and setting information can be deleted by swiping left. To delete courses and parts, swipe up on the Parts & Courses screen.
① Tap Course, Air Temperature, Road Temperature, Road Conditions, Humidity, Air Pressure, or Weather to enter or select the desired information.
*If you're connected to OpenWeatherMAP or a SwitchBot Thermo-Hygrometer, these settings will be automatically configured, so you only need to enter or change the settings you need.
② Tap Reference Settings (This will record the current smartphone installation status; this is only required during installation.)
③ If connecting a GPS logger, select "Launch Mock Location App" from the menu (to launch the mock location app).
④ Tap REC to start recording.
⑤ Tap STOP to end recording.
⑥ Tap Trip Data to view your trip data.
The confirmation screen displays graphs of the temperature, humidity, road temperature, weather, road conditions, air pressure, settings, trip trajectory, speed, acceleration, and pitch and roll during your trip. You can trace your driving path by pinching various graphs.
⑦ System Settings (Optional)
ACTION (If using a pseudo location service, specify the service name (for example, DroggerGpsService for the DG-PRO1 GPS sensor))
ALPHA (Specify the low-pass filter for measurement, from 0.1 to 0.9)
API_ID (OpenWeatherMAP API key)
AUTOSTOP (Specify the speed at which the automatic measurement stop function is enabled)
DEVICE_M AC (SwitchBot Thermo-Hygrometer MAC address)
G-SCALE (Specifies the acceleration (G) scale from 1 to 10)
HORIZONTAL (Sets the horizontal orientation to false, horizontal orientation to true)
LATITUDE (Sets the GPS latitude to 1 for north latitudes and -1 for south latitudes)
LPF (Sets the low-pass filter for the graph display from 0.1 to 0.9)
LOCUS (Sets the size of the driving track from 200 to 400)
LONGITUDE (Sets the GPS longitude to 1 for west longitudes and -1 for east longitudes) (Specify -1 if you want to use a pseudo location service)
MEASURE_SWITCH (Specify the acceleration (G) at the start of measurement, from 0.0 to 1.0)
MONITOR (Specify the monitor display during motion playback; 0: Hide, 1: Acceleration, 2: Pitch & Roll, 3: Phase)
NEARBY (Specify the allowable proximity between the measurement line and the driving track)
PACKAGE (If using a pseudo location service, use the package name (for the DG-PRO1 GPS sensor, use jp.bizstation.drgps))
R-SCALE (Specify the size of the driving track during motion playback, from 10 to 100)
SCALE (Specify the graph scale, from 0 to 10)
SPEED_CUT_FILTER (Specify the speed (km/s) at the start of measurement, from 0.0 to 4.0)
TO_ADDRESS (Email address to send email to)
USE_STAND (True if using the device upright; false if using it horizontally)
USE_LEFT (True if the left side is facing down or to the left; false otherwise)