Speaker Cleaner Remove Water

Safely clean the speaker from water, dust and dirt in 1 minute

Cleaning the phone's speaker from water is necessary if your smartphone has fallen into the input. To clean the speaker from water, run the application and press start. The whole procedure will take a little over a minute.
You can also clean the speaker from dust or dirt. The principle of operation of Speaker Cleaner is the same, only a different ultrasound is used.
Removing water from the speakers is a necessary procedure after the interaction of the mobile phone with water. After all, water in the loudspeaker will degrade the sound of the device, and can also penetrate the board with microcircuits. Therefore, blowing out the speaker should be done as soon as possible after contact with water.
Removing water that got into the speaker is not difficult. Cleaning takes place automatically, it is enough to start the cleaner. At the same time, the dust and dirt cleaner works in the same way.
A clean speaker can be dried by expelling dust by fluctuating the speaker diaphragm. To clean the microphone, use our free application in Russian.
If you dropped the phone into water, then the repair of the upper speaker by the "drying" method should be done immediately. Cleaning is necessary.
By the way, cleaning the microphone from dust can be done as a preventive measure. Nothing is needed for cleaning, except for the phone itself and the application.
Pulling or expelling water in the phone is not at all difficult. To remove the liquid, you need to knock it out with sound waves of a special range.
Pumping out trapped moisture is a mandatory process for repairs. It is necessary to push out the water in a timely manner. Speaker cleaning is important! Restore the normal sound of your device!